6
GB IE
©
202
1
Focal Point Fires Ltd.
Installation Requirements
· Do not connect the heater to the mains power supply until all of the instructions have been read and the appliance has been properly and
securely fitted.
· The minimum safe distances must be observed.
1. Secure the appliance to the wall using the securing brackets and screws supplied.
2. Press each bracket against the inside wall of the surround, ensuring that the bracket is
located as high as possible.
3. Mark the location of the 2 holes on the inside wall of the surround.
4. Carefully drill two 5 mm deep holes using a 2 mm drill bit. Do not exceed 5 mm depth to
prevent damage to the outside surface of the surround. These holes are to ensure that you
do not crack the wood when using the self tapping surround screws to fix the bracket onto
the surround.
5. Place the bracket on the 2 holes and secure it in place with 2 surround screws.
6. Repeat this for the other side of the appliance, so that you have 1 bracket on the left and
1 on the right of the appliance.
7. Carefully place the appliance against the wall and mark the holes of the brackets on either
side.
8. Carefully remove the appliance from the wall and use a 8 mm diameter drill bit, to
drill two 40 mm deep holes where the two markings are, and place the wall plugs in the
holes.
6.0 INSTALLING THE APPLIANCE - CONTINUED
GB IE
Surround
screw
Securing
bracket
Wall
plug
9. Place the suite aligning the two holes with the brackets, and use 2 fixing screws to fix the
fireplace to the wall.
The fireplace must be secure so that it is not possible to pull away using normal loads.
WARNING: This product is heavy. Failure to install this product securely and in
accordance with these instructions could lead to a serious or fatal injury!
X
screws
Fixing
