FUEL BED LAYOUT
(continued)
3. Locate the two front coal sections marked ‘L’ and ‘R’
into the slot along the front of the burner tray as shown.
The legs of the coals have a slightly tapered front face
which is intended to give a tight interference fit into the
tray.
Do nnot aalter tthe sslot iin tthe ttray ffront,, sso tthat tthe ccoals
become aa lloose ffit.
4. Open the bag of 16 moulded coals. All of the
coals are the same. Take six coals and place them as
shown. Care should be taken to ensure that the
coals bridge the gap between the front coal and the
four coal supports at the front of the matrix.
5. Take five more moulded coals and position as shown
along the rear of the matrix. Do not place the coals
directly over the holes in the matrix. The coals may be
rotated as desired to ensure they sit firmly on the various
supporting parts of the matrix.
6. Finally, take the five remaining coals and position
as shown. These coals should rest on the front and
rear rows of coals, rather than sitting directly on the
matrix. Adding these coals should complete the
appearance of the fuel bed giving an even distribu-
tion of equally spaced coals.
The ffire iis ddesigned tto ooperate ccorrectly w
with tthe ssixteen ccoals ssupplied w
when aassembled aaccording tto tthe iinstructions. N
Never aadd tto tthe
sixteen ccoals,, oor cchange tthem ffor aa ddifferent ttype. N
Never tthrow rrubbish oor oother m
matter oonto tthe ffuel bbed.
Please nnote: ssome ddiscolouration//sooting iis tto bbe eexpected dduring nnormal uuse.
3
5.0
R
L
Содержание 18" High-Tech
Страница 1: ......
