18 |
P a g e
5)
Tap on the camera icon and take a picture for your car profile.
6)
The text box (under camera icon) for the In-Car unit ID will be
automatically filled a unique ID number.
7)
Key in the name you would like to identify your car.
8)
Select the car manufacturer recommended tire pressure for the front and
rear tires. The information is usually available on a sticker at the door jam
(side of the driver’s door) or in the owner’s manual. For certain car
models, the information sticker may be on the trunk lid or on the fuel
door. You cannot proceed with the pairing without the input of this
information into the FOBO Tire 2 App.
9)
Click save icon on the top right corner of the screen.
10)
Sensor are pre-installed with in-car unit from the factory, each sensor is
inserted with a battery tab. Unscrew the sensor cover, remove battery tab
and install sensor on the tire position as indicated on the battery tab.
Preform this with one sensor at a time, continue the same procedure with
other three sensors (one at a time).
CAUTION:
Motor vehicles of all kinds (cars, trucks, motor scooters and motorcycles) come
with a very wide array of rims, wheels, and tires, with an even larger choice of
aftermarket products. It is impossible for us to test every combination and check
the fitment of the FOBO sensor. In some instances, when the FOBO sensor is
screwed onto the valve stem, it might extend slightly beyond the face of the
rim/wheel. If the rim/wheel comes close to or strikes an object, such as a curb,
a pothole, the guide rail for an automatic car wash, or a component on the
vehicle, the FOBO sensor or the valve stem itself might become damaged. This
can cause the FOBO to provide improper readings, or might cause a loss of air
Knob cover
CR1632 battery
Battery Tab
Tire Position
