15 |
P a g e
5.10
Clear Memory
The most updated tire pressure reading will be displayed in the Bike Status screen
whenever the phone and FOBO Bike are within Bluetooth connection range. These
pressure readings will be always be displayed as memory until the phone receives
the next pressure reading update from FOBO Bike sensors.
User can clear the memory of Tire Pressure readings by selecting Clear Memory
option in the bike setting screen. All relevant tire boxes in the Bike Status screen
will be cleared and display “--" until the phone receives signal from FOBO Bike
sensors.
6
FOBO Bike Alert Messages
You will get below alert messages on your smart phone during operation of FOBO
Bike under different breached conditions, please find a safe location to stop your bike
and check the alert messages on the smart phone.
6.1
Pressure too low
You will get this alert when tire pressure drops below 8%(first level), 15% (second
level) or 25%(third level) from recommended pressure.
NOTE: IT IS DANGEROUS TO RIDE WITH LOW TIRE PRESSURE. THE
FULL WEIGHT OF THE BIKE AND PASSENGER LOAD WILL BE
COMPRESSING THE TIRE WALLS AND MAY CAUSE TIRE FAILURE
LEADING TO ACCIDENTS, INJURY OR DEATH.
6.2
Pressure too high
This alert will happen when tire pressure increases above 25%(first level),
35%(second level) or 45%(third level) from your bike tire recommended pressure .
It is not advisable to ride at high tire pressure for too long. It will cause excessive
uneven wear to the tire thread.
6.3
Temperature too high
FOBO Bike will alert when the temperature detected exceeds 65
o
C/149
o
F. Note
that the temperature inside the tire may be higher than the temperature detected by
