- 17 -
4.4
Extended accumulation and totalisation of weighings
The unit can account for weight (accumulate weighings), using the data to print a ticket per
printer and/or label and/or send the weighing data through the serial communication ports
(PORTS).
The unit allows individual weighings (printing a ticket for each weighing) or multiple
weighings (with several weighings in the same ticket and finalised with a total) to be done
automatically (when detecting stable weight on the platform) or manually (by pressing the
INTRO key when the unit displays stable weight).
Three conditions must be met in order for the unit to account for a weight (carry out
weighing): there must be stable weight, which exceeds the value defined as minimum
weighing (*), with the weight dropping below the minimum weight necessary to carry out
weighing at some point since last weighing (i.e. the last weighing has been discharged).
Pressing the key
4.4.1
Manual accumulation
In order to carry out manual accumulation, press the ENT key when the unit shows a
stable weight value above the value defined as minimum weighing.
The following example assumes a stable weight of 1,754 kg, which we have previously
tared manually at 1,538 kg. (1754-1538 = 0.216) and the active code is “HIERRO”.
Single weighing is selected using the W.UNIQ. option in the Functions
menu.
Automatic weighing mode is selected using the AUTOAC option in the
Functions menu.
(*) The minimum weight value for a weighing is determined using the
WEI.MIN option in the unit's Programming menu.