Need help? Go to www.weemote.com
7
EQUIPMENT SETUP
SETUP C: An old TV with a
manual channel changing knob
that is controlled by a Cable Box
or Satellite Box.
TV
Cable Box
Satellite Box
Cable System
OR
Broadcast signal
Satellite System
DIAGRAM 3: SETUP C
Note: Cabling from your satellite box or cable
box must go to the main antenna connection
on your TV. This is the standard method of
cabling to your TV, using channel 3 or 4 on
the TV for normal operation. The Weemote®
will not support cabling using RCA plugs
connected to the video ports of your TV.
Need help? Go to www.weemote.com
8
SEARCHING FOR YOUR CODE
In some instances, you may not find a proper
code that works with your TV or SET-TOP box.
In this case, the Weemote® can send every
code available in it’s library to see if one of them
matches your equipment.
As a rule, you should not use this section until
you have tried every code number listed for your
brand TV or SET-TOP box. You should have
already tried all the codes listed for your manu-
facturer located in this guide.
1. Turn on the TV or Set-Top box, depending on
which device you are searching for.
2. Press the “TV” or “STB” button, depending on
which device type you are searching for. After 3
seconds of pressing the button, the LED light
starts to flash.
3. Press the “VOLUME UP” (top part of the long
yellow button) about every 1/2 second until the
TV or Set-Top box turns off. Every time you
press the volume up button, the LED will flash
once showing that a code has been sent to the
TV or Set-Top box.
You may need to press the button a number of
