V20201210
•
Page 7 of 11
Model: MU-JR-PSGN130-H50
3
Operation
1 .
Follow all instructions from chemical manufacturer.
Place the chemical suction line into a container of
pre-mixed chemical solution.
2 .
Plug the unit in to a GFCI protected 120 VAC power
outlet.
3 .
Turn the power switch ON to start the air compressor.
4 .
Verify that the air shut-off valve at the trigger gun is
in the closed position and
5 .
Open the air inlet valve (QFSOV14) to the control box.
6 .
Point the discharge wand in a safe direction and
open the air shut-off valve at the trigger gun.
7 .
Squeeze the trigger handle to begin misting.
Note:
Both discharge valves should be completely
open while misting.
8 .
To stop misting, release the trigger handle and the
close the air shut-off valve.
3
4
2
5
7
6
Open
Open
On
Close
Close
Off
