4
B 270-22-F+CRN 20-3 - 7009065_
UK – 27.09.2017
This symbol refers to safety and danger moments. Neglect of these instructions can cause damage on persons
and objects.
1.4 Safekeeping
You are requested to store this manual in a place where it is at your disposal at any time, and it should be
handed over to the person responsible for this product. Should the manual get lost, please don’t hesitate to
require another one from your agent
1.5 Declaration of conformity
We FOAMICO declare that this product is in conformity with the following directives:
- Machinery (2006/42/EC).
- Electromagnetic compatibility (2004/108/EC).
- Electrical equipment designed for use within certain voltage limits (2006/95/EC)
- Electrical equipment designed for use within certain voltage limits (2006/95/EC): standard used: EN
61800-3:2004
2
Safety
2.1 Safety during operation of the system
Suitable working clothes are recommended, e.g. as protection against 70°C hot water. Goggles, respirators,
and rubber gloves should always be used.
The use of non-slip footwear is recommended, because due to water and foam the floor sometimes can get
slippery.
Do not connect or use detergent before having read the instructions from the Detergent supplier. Always
consult the Detergent supplier to get instructions for correct use. Wrong use of detergent can be dangerous, it
can produce poisonous gas, great chemical burns an allergic reactions.
The system should not be started up before the operator using the system, has been instructed in the correct
utilization, adjustment, and maintenance of it. Never direct the water jet towards persons.
Make sure that the couplings ”lock” when the hose and nozzles are connected. Always follow this procedure
before use. Always depressurize the system after use. This is done by first closing the valve for the water
supply and afterwards opening the low-pressure valve or gun.
During operation of the system: ensure that the low-pressure gun/valve is closed, before releasing the
coupling and change the nozzle. When the low-pressure gun/nozzle is opened, the water jet will cause a
certain back pressure. Make sure to have a strong grip on the handle and a firm foothold.
The noise level from the equipment is less than 70dB (A). During rinsing, the operator is exposed to a higher
noise level. This is caused by the impact from the water jet on the surroundings. It is therefore recommended
the use ear protectors during the cleaning process.
Never direct the water jet towards electrical equipment. Avoid water in electrical plugs.
