FOAMICO 7001412, Руководство по эксплуатации

Страница: 11 / 36

11 MSC 0106_NEXT_7001412-17_UK 22-08-2019
5.4 Spray disinfection .
1. Mount the disinfection nozzle in the coupling at the low pressure valve / gun (marked with yellow
protection)
2. set the handle POS. D fig. 5.1 in disinfection position
3. The system is now ready for sanitizing. Sanitize by open the low pressure valve / gun.
4. After sanitizing the system must be rinsed with clean water. Place the hose for disinfection in a container
with clean water. Open the low pressure valve/ gun for minimum 15 sec
5. ATTENTION! Set the handle POS D fig 5.1, back in rinse position when Foam operation is ended.
6: ATTENTION! Before choosing another cleaning operation with another chemical, the system must be
flushed with clean water for at least 30 seconds. This is done by following the instructions in 5.2 “rinsing
operation”
5.5 Stop of operation
1. Make sure that the injectors have been rinsed with clean water
2. ATTENTION! When not used the mains station must be shut off. Turn the Handle
POS D fig 5.1 into stop
position . Close the valves at POS. E fig.5.1
3. Depressurize the hose by opening the low pressure valve /gun.
4. Disconnect the hose.