2
Product Overview
* Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
** Area covered and run time may vary based on humidity, air flow, and product used.
V20200501
•
Page 5 of 14
Model: MU-AC-15N, MU-AC-15N-PSGN130
Product requirements
Liquid temperature range
40-100˚F (4.4-37˚C)
Electrical requirements
120 VAC at 60 Hz, 8.5 amps (GFCI protected outlet)
Operating voltage
120 VAC
Chemical compatibility
Chemical products used with this equipment must be formulated for
this type of application and compatible with unit materials and pump
seals. For more information on chemical compatibility, consult the
manufacturer or SDS for your product or contact our customer service
department.
Power type
Electricity
Chemical pickup type
Draws from pre-mixed solution
Number of products unit can draw from One product
Suction line length/diameter
3/8 in. (9.5 mm) inside diameter
Capacity
15 gallons (56.8 liters)
Discharge line length/diameter
25 ft. (7.6 m) coiled twin-line tubing with 1/4 in. (6.4 mm) outside diameter
Discharge wand/tip type
Handheld double-barrel misting wand with one nozzle or Polypropylene
trigger handle with misting nozzle
Output distance
3-4.5 ft. (0.9-1.4 m)
Output volume
8.9 oz/min (263.2 ml/min) at 50 psi (3.4 bar)
Flow rate*
8.9 oz/min (263.2 ml/min) at 50 psi (3.4 bar)
Pump seals
Santoprene, Viton, or Kalrez
Run time from full tank**
Approx. 3.5 hours
Nozzle type
Pneumatic fog nozzle
Number of nozzles
1 nozzle
Droplet size
15 microns at 50 psi (3.4 bar)
Wheel type
Two 10 in. (25.4 cm) non-marking wheels
Two 5 in. (12.7 cm) casters with lock
Product specifications
