FOAM-iT MU-AC-15N Скачать руководство пользователя страница 3

1

 

Safety

PEOPLE OR OBJECTS CAN BE HURT OR DAMAGED IF THIS UNIT IS NOT USED CORRECTLY!

Failure to read all the instructions before operating the unit may result in personal injury or death from 

the improper use of the chemical solution. Anyone handling, operating or using the unit must read, 

and understand, the instructions in the manual. The buyer assumes all responsibility for safety and 

proper use in accordance with the instructions.

Using, or servicing, the unit without proper protective clothing, gloves, and 

eye wear may result in serious injury such as burns, rashes, eye, throat 

or lung damage and death. Always wear protective clothing, gloves, and 

eye wear when using, or servicing, the unit. Protect eyes, skin, and lungs 

against drifting spray.

Chemical solutions may pose a health risk and death if they contact the skin or eyes, are inhaled 

or swallowed. Always read, and follow, all chemical safety precautions and handling instructions 

provided by the chemical manufacturer and the Safety Data Sheet (SDS) associated with the chemical 

solution being used before using the unit.
Pressure within the equipment may cause an unexpected release of the chemical solution and 

cause serious injury such as burns, rashes, eye damage, throat or lung damage and death. Always 

depressurize and clean the unit after each use. Never leave the unit unattended while pressurized.
Using the unit with fluid temperatures above 100°F (37.77°C) may result in scalding, burns, serious 

injury or death. DO NOT use a solution with a temperature above 100°F (37.77°C).
Operating the unit when damaged or leaking may result in exposure to chemical solutions, serious 

injury or death. Never use the unit if it is damaged or leaking.
Never point the discharge wand at yourself, another person, or any object you do not want covered  

in chemical.
Using incoming air pressure exceeding 100 psi (7 bar) may result in pressure buildup, explosion, 

serious injury or death. DO NOT exceed 100 psi (7 bar) incoming air pressure when operating the unit.
Use of hydrocarbons and flammable products may result in explosions, fire and serious injury or 

death. Never use hydrocarbons or flammable products with the unit.
Mixing an alkaline with an acid may result in a chemical reaction. Overheating of the mixture may 

cause it to splatter caustic compounds or release hazardous fumes, gas and vapors. Always flush  

the unit with fresh water for five (5) minutes when switching from an alkaline to an acid or an acid to  

an alkaline.
Touching damaged electrical cords (i.e.: bare wires, bare receptacles) may result in electrical shock, 

serious injury or death. Always inspect the electrical cords and extension cords for damage before 

connecting the unit to the power supply. DO NOT touch a damaged electrical cord, or extension cord, 

that is connected to the power supply. 
Operating the air compressor in wet weather or in wet conditions may result in electrical shock, 

serious injury or death. Always place the unit (air compressor) in an area away from the misting 

direction. DO NOT touch the air compressor, electrical or extension cords if your hands or feet  

are wet.

V20200501 

• 

Page 3 of 14 

Model: MU-AC-15N, MU-AC-15N-PSGN130

WARNING

!

Содержание MU-AC-15N















Отзывы: