FNM alpha SM 230, Руководство пользователя, Страница: 45 / 72

44 45
Putting into operation
Setting the encoding
If you want to use an encoded radio transmission, the encoding will have to be acti-
vated. Proceed like at the manual setting of the IP address. But then select "Wireless
Security Settings" on the page "Network Configuration". Now you can carry out the
desired security settings.
Fig.: Configuration page WLAN security settings
Further settings of the WLAN module
The WLAN module is by default provided with a configuration that is optimal for many
applications. Should it however become necessary to optimize the configuration, a
multitude of settings can be made manually. A HTML page is available for this pur-
pose. Open a browser (e. g. Internet Explorer from Microsoft) and call the configura-
tion page (by entering the IP address into the address line).
Searching for modules by means of Discovery-Tool
In case you do not know the address of a LAN module and/ or you do not have a
DHCP server, modules that are not obtainable can be found by means of the
Digi-Device-Discovery-Tool and the IP address can be configured.
The Device-Discovery-Tool can be downloaded on the following website:
http://www.digi.com/support/productdetl.jsp?pid=2466&osvid=56&s=53#utilities.
After starting the programme, all obtainable modules are automatically searched and
displayed. If you click on the desired module and afterwards on the link "Configure
network settings", you will get to the setting page for the network parameters.