FNM alpha SM 230 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 72

FNM alpha SM 230 Скачать руководство пользователя страница 23

22

23

Putting into operation

Initial state of the sensor module after starting

When putting the sensor module into operation in battery mode, the analogue out-
puts as well as the UART interface are deactivated.
Insert the battery according to the polarity at the sensor module.
If the sensor module is supplied with voltage by means of a power supply unit when
putting it into operation, the analogue outputs (channel 1 and 2) as well as the UART
interface will be deactivated.

Please note: Wrong polarity can lead to the destruction of the unit!

After inserting the battery into a sensor module, this module automatically starts to send its
measurement data (analogue and digital inputs as well as PT1000) in a preset interval
to the base station. In case there is a change at a digital input, an additional message
is sent to the base module.

Initial state of the repeater module after starting

After connecting the power supply unit or after inserting the battery, the repeater module
automatically switches to receive mode and forwards the received data.

Please note: Wrong polarity can lead to the destruction of the unit!

Please note: Connect the cable of the power supply unit with the correct

polarity!

«
...
21
22
23
24
25
...
»

Содержание alpha SM 230









































































Отзывы:

Нет отзывов