FMUser FBE300 Magicoder, Руководство пользователя

Страница: 12 / 37

FMUSER INTERNATIONAL GROUP INC. 广州市汉婷信息科技有限公司
12 / 37
6.2 Network setup
Network setup
Network mode: Select the network setting mode, "DHCP" is the IP address assigned by the
router, "Manual" is the manual setting fixed IP address
IP address: Set the IP address of FBE300. This address should be in the same IP segment as your
router.
(For example: If your router IP is 192.168.1.0, the FBE300 IP should be set to 192.168.1.XX "XX"
can be any number from 0 to 254, except 0)
Subnet mask: Set the subnet mask of FBE300. If there is no special case, it is usually set to
255.255.255.0
Default Gateway: fill in the gateway IP address of your local area network, if there are no special
circumstances, it is usually your router IP address
Alternate DNS: Set the DNS address of FBE300
MAC: set MAC address of FBE300
(After setting a new IP address for the FBE300 transcoder, be sure to remember the new IP address, otherwise you will not be able to
enter the background management interface of the transcoder. If you encounter a forgotten IP address after modification, you cannot
enter the background management interface Go to bbs.fmuser.com for help)