FMUSER INTERNATIONAL GROUP INC. Forum: http://bbs.fmuser.com
13
/
26
Modifications will take effect upon restart of the device.
1) Set FMUSER FBE200 encoder’s IP address according to your LAN IP. For example, if your
LAN IP is 192.168.8.65, FBE200 IP should be set to 192.168.8.XX ("XX" can be any number
ranging from 0 to 254 except from 168). FMUSER FBE200 should be in the same Network
environment as your LAN IP.
2) If you don’t have LAN ,you can try to use WIFI connection by setting the WIFI ID and the
password (This setting is applicable only to the versions with WIFI).
The wifi is only for 2.4G ,if you found the wifi can not connect ,try to reset find out the router open
2.4G ,sometimes they work for 5.8G.
3) Click “set up” button to save the new setting.
4) After network setting is done, you need to reboot the device to make it work.
** Reset and Initialization, if you forgot the IP address you’ve set, please reset to factory.
a) Press and hold the Reset button for 5 seconds to reset and initialize the FMUSER
FBE200 HDMI Encoder.
b) After reset, FMUSER FBE200 will restore factory setting with IP address of
192.168.1.168.
