Installation Manual RMGZ100A
5
3
Assembly Preparations
3.1
Assembly Conditions
The Force Measuring Sensor RMGZ100A is defined as “partly completed machinery”
according to the
Directives 2006/42/EC, article 2
. In order to assure a proper
functionality of the parts and guarantee the essential health and safety requirements of
operators working with it, the following conditions for the assembly of RMGZ100A
must be met:
Caution
The Force Measuring Sensors may not be stressed over the specification limits
neither during assembly nor operation. The unit’s overload protection value may
not be exceeded.
Caution
The attachment points for the Force Measuring Sensors on the machine frame must
be properly designed. The bearings need to be appropriately mounted.
Caution
For correct installation and operation, follow the electrical wiring diagram and
instructions in this manual.
