Installation Manual RMGZ100A
3
1
Safety Instructions
All safety related regulations, local codes and instructions that appear in the manual or
on equipment must be observed to ensure personal safety and to prevent damage to the
equipment connected to it. If equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
Do not stress the equipment over the specification limits neither during assembly nor
operation. To do so can be potentially harmful to persons or equipment in the event of
a fault to the equipment.
1.1
Description Conditions
a) Danger of health injury or loss of life
Danger
This symbol refers to high risk for persons to get health injury or loss life. It has to
be followed strictly.
b) Risk of damage of machines
Caution
This symbol refers to information, that, if ignored, could cause heavy mechanical
damage. This warning has to be followed absolutely.
c) Note for proper function
Note
This symbol refers to an important information about proper use. If not followed,
malfunction can be the result.
The Force Measuring Sensors may not be stressed over the specification
limits neither during assembly nor operation. The unit’s overload protection value
may not be exceeded.
The attachment points for the Force Measuring Sensors on the machine
frame must be properly designed. The bearings need to be appropriately mounted.
In order to avoid ground loops and hence electrical interferences, cable shield
needs to be connected only to the measuring amplifier. On the force measuring side
the shield must stay open
