FMS BAE Hawk Red Arrow PNP, Руководство по эксплуатации

Страница: 9 / 10

FRP06
-
+
A
B
Y
Receiver instruction
The FRP06 receiver is six channel miniature receiver. Each channel is marked with a number (1 to 6).
Also polarity for the servo/esc wires are shown on the receivers case. The minus sign (-) is used to connect
the black (sometimes brown) wire to. The plus sign (+) shows the connector for the red wire
and the ' ' sign
is used for the orange signal wire (sometimes white). If you choose to configure your plane with the A-Style
wing, we would like to suggest that you insert the rudder servo pin into the socket of channel 1 (aileron),
leaving the socket of the fourth channel (rudder) empty. If you choose B-Style wing, we would suggest that
you insert the rudder servo pin into channel 4 on the receiver and the aileron servo wire into channel 1.
Testing distance
The remote distance is about 300 meters. Finish all installation before testing, the simple and effective
method as following:
Keeping the transmitter aerial without pulling out, let your partner go ahead with RED ARROWS, and debug
the remote control receiver. Check the power changes with distance. Inspect whether the stabilizer, vertical
empennage, aileron work properly.
300
20
- 7 -
A
-N
O
R
M
IX
1
/2
A
IL
1 2 3 4
E
L
E
T
H
R
R
U
D
NOR
REV
D
/R
E004-FT06B-A001
A D/R
B A-1/2
C 1
D 2
E 3
F 4
NOTICE
The E004-FT06B-A001 transmitter requires 8AA size batteries that are not included in the box.
E004-FT06B-A001 8AA