
ASSEMBLING THE AIRCRAFT
Pls don't connect with the power before the finished the assembly to avoid the damage.
CAUTION
- 4 -
1. Install Stabilizer
Adhibit the stabilizer and fuselage
2. Install Vertical Empennage
Adhibit the vertical empennage and fuselage top cover
3. Install the turning front wheel
A. Firstly, make the servo wire through the hole of fixed hold into fuselage interior.
A.
B. Install the servo angle flake onto the servo, make the second hole of servo angle flake bigger than 2mm,
invert the servo, make the servo angel flake face to fuselage, rotate to left and right as 90 degree angles,
then press into the slot hold.
B. 2mm
90
C. Press the turning steel wire into the second hole of servo angel flake, then fix the turning steel wire on
the fastness board of front wheel using the buckle.
C.
5. Don't fly your plane nearby airports or routes where often commercial aircraft are flying. Also, don't fly
your plane in parking lots or other places where it can cause problems with persons or objects. In some
emergency cases it is possible that full scale aircraft or helicopters are entering the area you are flying
in. In these cases you always have to land you plane as quickly as possible. Commercial flights always
have priority above your radio control airplane, also if they are breaking the law, for example for flying
too low.
1
2
3
4
5
Содержание BAE Hawk Red Arrow PNP
Страница 1: ......