background image

3

Before assembly, please inspect the contents of the kit. The 

photo below details the contents of the kit with labels. If any 

parts are missing or defective, please identify the name or 

part number (refer to the spare parts list near the end of the

 manual) then contact your local shop or email us: support

Kit contents

Introduction

New release: FMS A-10 Thunderbolt II “Warthog”V2 In 2017, FMS announced its flagship aircraft- the A-10 Thunderbolt II. Known 

for its impeccable scale features and awesome performance, the “Warthog”is truly a favorite amongst pilots and spectators alike.

To make the best even better, FMS has dedicated significant engineering effort in building upon the first generation A-10, making 

evolutionary design and performance improvements to create the A-10 V2.Retaining features such as the screw-together airframe, 

ball-linked control surfaces and high strength spar system, the A-10 V2 comes together just as easily its predecessor. Scale details 

remain impeccable- realistic rivets, panel lines, removable bombs and rockets and realistic absorbing CNC landing gear, just to 

name a few.Built upon these great features, the A-10 V2 receives ten major structural, electronic and scale improvements:

1.Improved ESC: The dual 70A ESCs are uprated to dual Hobbywing 80A ESCs, with an external 8A BEC for bulletproof 

performance.

2.Upgraded servos: Elevator and Rudder servos have been upgraded to 23g metal geared servos from the original 17g metal 

geared units- meaning more torque for the control surfaces giving even better performance.

3.Precision landing gear design: The nose landing gear has been redesigned to minimize play- ensuring the assembly tracks 

straight and true even at high speeds.

4.Improved connectors: ‘soft’ connector design significantly increases the reliability of the wing quick release system.

Wingspan: 1500mm(59.1in) 

Overall length: 1368mm(53.9in) 

Flying weight: ~ 4100g

Motor size: 2860-KV1850

Wing load: 113.2g/dm²(0.26oz/in²)

Wing area: 36.2dm²(561sq.in)

ESC: 80A ESC X 2 with 8A BEC

Servo:  13g metal x 5            23g metal x 4

Recommended battery: 22.2V 5000mAh 45C 

Specifications

@fmsmodel.com

.

Introduction 

Kit contents 

Model assembly    

Battery installation

Receiver diagram

Preflight check
Clevis installation 

Control horn and servo arm settings 

Center of gravity(CG) 

Before flying the model 

Flying course

Troubleshooting 

Spare parts list content 

T

Table of contents

·····························································

·····

3

·························································3

·······················································4

·············································

··

······  8

·········································

··

··

······  9

································

  ·····························

··

·····

·····

·····

  9

···················································· 11

·················

···············································  11

············································12

·························································12

······················································13

············································13

11

5.Increased elevator travel: giving pilots more precision and control authority

.

 

6.Improved tires: an improved, more durable compound extends 

the service life of the landing gear wheels, even in rough field 

operations.

7.Robust canopy latch: extended pin on the canopy latch reduces  the possibility of an accidental canopy release in flight.

8.Enlarged battery bay: now fits two 6S 3300mAh Lipos, for significantly increased flight times!

9.New trim scheme: even more attractive trim than the original!

10.New scale pilot

.

Features:

• Dual 70mm inrunner 12 bladed EDFs and Hobbywing 80A   ESCs provide ample thrust.

• Highly realistic scale features: Rivets, panel lines, CNC shock   absorbing landing gears, removable bombs and rocket pods, 

  scale pilot figure etc.

• Ultra bright LED light system.

• Electronic retracts with over current protection.

• Large diameter bearings in the landing gear allow the A-10 V2 to roll smoothly over rough terrain.

• Preinstalled ball-linked control horns for accurate and precise movements.

Feel the FMS difference! No detail was overlooked in creating the A-10 V2! Feel the power and turn every head at the flying field 

with your very own “Warthog”.

Содержание A-10 Thunderbolt II V2














Отзывы: