www.fmiproducts.com
112108-01F
5
SAFETY INFORMATION
Continued
3. Never install the fireplace
• in a recreational vehicle
• in windy or drafty areas where curtains or
other combustible (flammable) objects can
make contact with the fireplace front
• in high traffic areas
4. Turn fireplace off and let cool before servicing,
installing or repairing. Only a qualified service
person should install, service or repair this
fireplace. Have fireplace inspected annually
by a qualified service person.
5. You must keep control compartments, burn-
ers and circulating air passages clean. More
frequent cleaning may be needed due to ex-
cessive lint and dust from carpeting, bedding
material, etc. Turn off the gas valve and pilot
light before cleaning fireplace.
6. Have venting system inspected annually by a
qualified service person. If needed, have vent
-
ing system cleaned or repaired. See
Operating
Guidelines and Maintenance Instructions
,
page 26.
DIMENSIONS
FRONT VIEW
30"
(Opening)
25"
19
7
/
8
"
(Opening)
RIGHT SIDE
1
7
/
8
"
22
5
/
8
"
41
1
/
8
"
32"(Opening)
1
7
/
8
"
39
3
/
4
"
26
3
/
8
"
3"
1"
3
1
/
2
"
22
5
/
8
"
34
3
/
4
"
3"
BACK VIEW
TOP VIEW
(Left Side)
(Right Side)
(Front)
(Back)
24"
10
1
/
2
"
1
1
/
2
"ø
1
1
/
2
"ø
10
1
/
2
"
11
15
/
16
"
Figure 1 - Dimensions for Left/Right Side Corner Unit
7. Do not use any solid fuels (wood, coal, paper,
cardboard, etc.) in this fireplace. Use only the
gas type indicated on fireplace nameplate.
8. Do not use fireplace if any part has been ex
-
posed to or under water. Immediately call a
qualified service person to arrange for replace
-
ment of the unit.
9. Do not operate fireplace if any log is broken.
10. Do not operate fireplace with glass door
removed, cracked or broken.
11. Provide adequate clearances around air
openings.
12. Fireplaces with the suffix of -HA have been
designed to operate at altitudes of 4000 feet
and above. For horizontal installations above
2,000 feet, it is recommended that a 12" exten-
sion pipe be added before starter elbow (see
High Altitude Installation
, page 18).