www.fmiproducts.com
117437-01F
19
INSTALLING LOGS AND GLOWING
EMBERS
A 4 piece ceramic log set comes packed in-
side the unit firebox. Removal of glass door is
necessary to unpack and assemble logs and
add hearth treatments. Follow steps under
Removing/Replacing Glass Door
, page 18 to
access logs and burner.
Assemble logs and add burner treatments
as follows:
1. Position base log onto burner log mounts
(see Figure 28).
Figure 28 - Installing Logs
FIREPLACE INSTALLATION
Continued
Figure 29 - Applying Ember Material
Note: Cut out on bottom should fit over
mounts and base log should be positioned
against rear panel.
2. Position holes on bottom of rear log over
pins on base log (see Figure 28).
3. Position top left log and top right log
onto rear log and base log as shown in
Figure 28.
4. Break ember material into quarter sized
pieces and place a single layer along the
full length of ember tray to hide bottom
edge of base log (see Figure 29).
5. Replace glass door and louver panels
(see
Removing/Replacing Glass Door
,
page 18).
WARNING: The glass door
must be securely in place before
running this fireplace. Do not run
this fireplace if glass is missing
or broken.
Top
Right
Log
Top Left
Log
Rear
Log
Burner
Base Log
Rear Log
Stand
Burner
Pan
Log
Mounts
Ember
Tray
Ember
Material