www.fmiproducts.com
125566-01A
22
inStallation
Continued
Place the middle log (#2) in front of the
1.
U-burner and against the edges of the
plate as shown in Figure 38.
Place the front left log (#3) onto the
2.
base assembly between the middle log
(#2) and the grate fingers. The back of
the front left log (#3) will rest against the
front of the middle log (#2). The notch
at the end of the front left log (#3) will fit
around the grate bar. See Figure 39.
Place the front right log (#4) onto the
3.
base assembly between the middle log
(#2) and the grate. The back of the front
right log (#4) will rest against the front of
the middle log (#2). The notch in the end
of the front right log (#4) will fit around
the grate bar. See Figure 40.
Figure 41 - Installing Log # 5
Figure 40 - Installing Log # 4
Figure 39 - Installing Log # 3
Figure 38 - Installing Log # 2
2
3
Place the left back top log (#5) on top of
4.
the rear log (#1). Match the rectangular
peg on top of the left side of the rear log
(#1) with the rectangular hole on the bot-
tom of the left back top log (#5). Match
the metal pin on the top of the rear log
(#1) with the round hole in the bottom
of the left back top log (#5). See Figure
41.
Place the left top forked log (#6) on
5.
the top of the middle log (#2). Match
the rectangular projection on top of the
middle log (#2) with the rectangular hole
on the bottom of the left top forked log
(#6). Match the metal pin on teh top of
the middle log (#2) with the round hold
in the bottom of the left top forked log
(#6)See Figure 42, page 23.
4
5
Metal
Pin
Retangular
Peg