Single working without transmitter
* Plug probe sensor(s) into the channel(s) on the monitor. The monitor works as a digital BBQ thermometer. The wireless
receiving function is stopped. The monitor can not receive data from the transmitter any more.
* Setting and operation are same as the wireless monitor which mentioned in above pages .
* Setting is same as the content mentioned in
“setting on the monitor”.
FAQs
* Wireless communication is interrupted,
flashing on screen. How to do?
The distance between the monitor and the transmitter is out of range of 30 meters. Wireless communication is invalid in this
range. User needs bring the monitor close to the transmitter. Push and hold
△
button on screen for 3s, generate a 60s
continuous search to find the transmitter quickly to get the reconnection.
* Cooking is stopped when push and hold START button for 3s or above. What will happen?
The monitor will be no working without any display. The transmitter has to finish the working individually and don't send data
to the monitor any more. You may push and hold START button for 5s to make the monitor rework. The memory will be no
lost, no need reset the parameter.
* Plug the probe sensor wrong. It should be CH1. How to solve this problem?
Take the two probe sensors out and plug them correctly.
* Once the probes plugged into the channels of thermometer monitors, the thermometer switched
to wire working version automatically.
Packing List
Monitor
1pc
Transmitter
1pc
Probe sensor 1pc
Manual 1pc
Battery 5pcs
www.fmg-tech.com
