Product registration
If it is the first time to use the transmitter, please finish the registration between the transmitter and monitor.
-Once install 3pcs batteries to the monitor, there will be 120s auto-searching for remote signal while
flashing on
right top of screen.
-Load 2pcs batteries to the transmitter quickly, touch the power button
, the ring lambs flash in cycle.
-Once
“EN” displayed on the screen and
icon stops flashing which means the registration is succeed.
If the registration is failed, please repeat the above steps to register again till EN displayed.
Product operation
Setting on the monitor
* Channel selection
Touch
△
/
▽
to select channel of CH1 or CH2.
* Cooking mode selection
Touch SET to confirm the selected channel then enter cooking mode selection with flashing.
Touch
△
/
▽
to select cooking mode of
Recipe Mode
or
Timer Mode
or
Target Temperature Mode
Then touch SET to confirm.
1. Recipe Mode
There are 8 foods pre-set for option.
Touch
△
/
▽
to select one food
from
Touch
SET
to confirm the food. Touch
△
/
▽
to select the cooking level of
RARE, M-RARE, MEDIUM
or
DONE.
Meanwhile the relative target temperature is shown on screen. Touch
SET
to confirm the level.
2. Timer Mode
When Time Mode is selected, touch
△
/
▽
to set countdown hour from 00
～
15. Touch SET to confirm the hour
and touch
△
/
▽
to set countdown minute from 00
～
59. Touch SET to confirm the minutes. The max countdown is
15 hours and 59 minutes.
When countdown time is less than 5 minutes, a buzzer sounds 4 beeps. The countdown displayed on bottom of
screen will be shown in seconds.
