FMC Technologies Smith Meter microLoad.net, Руководство по применению

Страница: 6 / 18

Section I – Connecting via Ethernet
Page 2 AB06064 · Issue/Rev. 0.0 (5/06
)
Configuring the microLoad.net for Ethernet Communications
Power up the microLoad (wait for microLoad to complete initialization)
Press <Enter> at the Ready screen to access the Main Menu
From the Main Menu, select Program Mode Menu and press <Enter>
Enter the Access Code when prompted and press <Enter>
From the Program Mode menu, select Comm. Directory and Press <Enter>
Select Host Interface and press <Enter>
From the Host Interface Menu set the following items:
IP Address: 192.168.0.1
Net mask: 255.255.255.0
Gateway: 192.168.0.10
Ethernet Control: Poll and Program
Com Link: Level 3
Return to the Main Menu using the <Clear> key
Note: If using the microLoad.net’s Ethernet port, make sure that none of the microLoad.net serial
communications ports are configured to the ‘SLIP (TCP/IP)’ function – configuring a SLIP connection will
disable the Ethernet connection.
It is recommended that the microLoad.net be installed to a private network (not connected directly to the
rest of the corporate LAN). This is best implemented by adding a second network interface card to the PC
that will be interfaced to the microLoads. This dual-interface PC can be set up as a ‘bridge’ allowing all
the other PCs in the corporate environment to reach the microLoad devices (given permission to do so)
but will prevent all other corporate LAN traffic from interfering with the microLoad.net communications.