FlyTek ZIP PRO 4, Руководство по эксплуатации и обслуживанию, Страница: 20 / 24

ZiP Pro 4 is equipped with an efficient device for the production of steam and hot water. To use such
device, it is necessary to press, on the front command panel, the specific turning on switch (ref. H); this
will allow the heating of the specific dedicated boiler. Wait about 5 minutes, during which the boiler will
reach the ideal operating pressure. Check through the pressure gauge (ref. O) that the pressure reaches
about 1.5 bars: when this occurs, the boiler is ready to deliver steam and/or hot water.
To deliver steam: insert the steam wand (ref. M) inside a cup or other container containing the liquid to
be heated or emulsified (i.e. milk) and turn the steam delivery knob (ref. I) counterclockwise until reaching
the correct steam intensity. Once obtained the desired result, turn the same knob (ref. I) clockwise until
stopping completely the steam delivery.
To deliver hot water: position a cup –or other suitable container- under the hot water nozzle (ref. N) and
turn the hot water delivery knob (ref. J) counterclockwise until reaching the correct flow intensity. Once
obtained the desired result, turn the same knob (ref. J) clockwise until stopping completely the flow of
hot water.
STEAM AND HOT WATER DEVICE
ZiP Pro 4 is equipped with a comfortable and practical electric cup-warmer tray with resistance, located
on the upper part of the machine, which reaches the ideal temperature about three minutes after it is
turned on through the appropriate switch (ref. L).
UPPER CUP-WARMER TRAY (ref. g)
During delivery never touch the steam wand and/or hot water nozzle, and do
not approach your face to the hot parts of the machine (burns hazard). The
heating surfaces of the machine are subject to residue heat even after use!
Do not touch the upper cup-warmer tray, and do not approach your face
to the hot parts of the machine (burns hazard). The heating surfaces of the
machine are subject to residue heat even after use!
20