FTr16S
接收机 Receiver
http://www.flysky-cn.com
Copyright ©2019 Flysky Technology co., ltd
产品规格
Product specification
通道个数：16 个
适用机型：穿越机
数据输出：PPM/i-BUS
频率范围：2.402-2.480GHz
发射功率：<20dBm（EU）
RF 标准：AFHDS 3
通道延时：＜ 20ms
天线类型：双天线
输入电源：3.5 ～ 8.4V
显示方式：LED 指示
在线更新：有
空旷无干扰地面距离（发射接收距地面 1 米）：大于
1000m
各通道数据：1500us；范围：900 ～ 2100us
外形尺寸：20*12*3.1mm
机身重量：<2g
安规认证：CE，FCC ID：N4ZFTR16S00
Channels: 16
Model Type: Racing Drone
Data Output: PPM/i-BUS
Frequency Range: 2.402-2.480GHz
Transmission Power: <20dBm(EU)
RF Standard: AFHDS 3
Channel Latency: <20ms
Antenna: Double Antenna
Input Power: 3.5-8.4V
Display: LED Indicator
Online Update: Yes
Range without interference 1m from the ground :
more than 1000m
Channel Data: 1500us；Range：900 ～ 2100us
Dimensions: 20*12*3.1mm
Weight: <2g
Certification: CE，FCC ID: N4ZFTR16S00
认证相关
Certification
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
DoC Declaration
Hereby, [Flysky Technology co., ltd] declares that the Radio Equipment [FTr16S] is in compliance with RED 2014/53/EU.
The full text of the EU DoC is available at the following internet address: www.flysky-cn.com.
CE Warning
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and
must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with
antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The
disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the
appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable
raw materials and the treatment of toxic substances.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
FCC ID: N4ZFTR16S00
If there is a critical hardware error the LED will remain red.
3. Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected
operation follow the steps above to bind again.
对码
Binding
