5119422-05
Husqvarna Outdoor Products
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - (00) 44 1325 300303 Fax - (00) 44 1325 310339
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
If any part is found to be defective due to faulty manufacture
within the guarantee period, Husqvarna Outdoor Products,
through its Authorised Service Repairers will effect the repair or
replacement to the customer free of charge providing:
(a)
The fault is reported directly to the Authorised Repairer.
(b)
Proof of purchase is provided.
(c)
The fault is not caused by misuse, neglect or faulty adjust-
ment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired, taken apart
or tampered with by any person not authorised by
Husqvarna Outdoor Products.
(f)
The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h)
The machine has not been used commercially.
*
This guarantee is additional to, and in no way diminishes
the customers statutory rights.
Failures due to the following are not covered, therefore it is impor-
tant that you read the instructions contained in this Operator's
Manual and understand how to operate and maintain your machine:
Failures not covered by guarantee
*
Replacing worn or damaged plastic cutters
*
Failures as a result of not reporting an initial fault.
*
Failures as a result of sudden impact.
*
Failures as a result of not using the product in accordance
with the instructions and recommendations contained in this
Operator's Manual.
*
Machines used for hire are not covered by this guarantee.
*
The following items listed are considered as wearing parts
and their life is dependent on regular maintenance and are,
therefore not normally subject to a valid warranty claim:
Plastic Cutters, Cutting Head, Electric Mains cable.
*
Caution!
Husqvarna Outdoor Products does not accept liability under
the warranty for defects caused in whole or part, directly or
indirectly by the fitting of replacement parts or additional
parts that are not either manufactured or approved by
Husqvarna Outdoor Products, or by the machine having
been modified in any way
Guarantee & Guarantee Policy
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Ay c l i ffe Industrial Park,
NEWTON AYCLIFFE,
Co. Durham. DL5
6 U P. Certify that the product:-
Category
........ Electric Lawn Trimmer
Make
.............. H u s q v a rna Outdoor
P ro d u c t s
Conforms to the specifications of Directive
2000/14/EEC
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Ay c l i ffe Industrial Park,
NEWTON AYCLIFFE,
Co. Durham. DL5
6 U P Certify that a sample of the above
product has been tested using directive
81/1051/EEC as a guide. The maximum A -
weighted sound pressure
l e v e l
recorded at
operator position under free field semi ane-
choic chamber conditions was :-
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEWTON AYCLIFFE,
Co. Durham. DL5
6UP Certify that a sample of the above
product has been tested using ISO 5349 as
a guide. The maximum weighted root mean
square
value
of vibration recorded at opera-
tor’s hand position was:-
Type of Cutting Device
. . . . Plastic Cutter
Identification of Series.
. . . . .See Product Rating Label
Conformity Assesment Procedure
....ANNEX VI
Notified Body
. . . . . . . . . . . . . . . . . . . . I . T.S., Cleeve Road, Leatherhead,
S u r re y. KT22 7SB England
Other Directives:-
. . . . . . . . . . . . . 98/37/EEC, 89/336/EEC, 73/23/EEC
& applicable standards:
- . EN786, IEC60335-1, EN60335-2-91,
EN61000-3-2, EN61000-3-3, EN55014-1, EN55014-2
Type
.................................................................................. A
Width of Cut
......................................................................B
Speed of Rotation of Cutting Device
................................ C
Guaranteed sound power level
........................................ D
Measured Sound Power Level
......................................... E
Level
................................................................................. F
Value
................................................................................ G
Weight
.............................................................................. H
EC Declaration of Conformity
Newton Aycliffe, 16/11/2005
M. Bowden,
Research & Development Director
A
B
C
D
E
F
G
H
MLite 28
28 cm
7,250 RPM
96 dB (A)
96 dB (A)
84.1 dB(A)
1.21 m/s
2
4.5 kg
A
B
C
D
E
F
G
H
MLite 30
30 cm
7,250 RPM
96 dB (A)
96 dB (A)
84.1 dB(A)
1.21 m/s
2
4.5 kg
