background image

Carton Contents

IMPORTANT !

Please check the contents of the carton are correct 

BEFORE

assembling your new product.

IF ANY PARTS ARE MISSING CONTACT:-

Husqvarna UK Ltd. Customer Service Department direct
Telephone : 01325 300303

Fax : 01325 302530

Safety

General

1. This product is not intended for use by persons (in-

cluding children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or in-
struction concerning the use of the product by a
person responsible for their safety.  Children should
be supervised to ensure that they do not play with
the product. Local regulations may restrict the age of
the operator.

2. Only use the trimmer in the manner and for the func-

tions described in these instructions.

3. Never operate the trimmer when you are tired, ill or

under the influence of alcohol, drugs or medicine.

4. The operator or user is responsible for accidents or

hazards occurring to other people or their property.

Electrical
AVOID ACCIDENTAL STARTING, REMOVE PLUG

FROM MAINS AND KEEP FEET AWAY FROM
THE SWITCH LEVER WHEN:- CLEANING
AROUND THE INSIDE OF THE SAFETY GUARD,
REMOVING OR REFITTING SPOOL CAP, MANU-
ALLY FEEDING OR REPLACING NYLON LINE 

1. The British Standards Institute recommend the use of

a Residual Current Device (R.C.D.) with a tripping
current of not more than 30mA.   Even with a R.C.D.
installed 100% safety cannot be guaranteed and safe
working practice must be followed at all times.  Check
your R.C.D . every time you use it.

2. Before use, examine cable for damage, replace it if

there are signs of damage or ageing.

3. Do not use the trimmer if the electric cables are dam-

aged or worn. 

Mini Trim Auto XT

If not used properly this trimmer can be dangerous!  This trimmer can cause serious injury to the operator and others,
the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this trimmer.
The operator is responsible for following the warning and safety instructions in this manual and on the trimmer. 

Explanation of Symbols on the product

Warning

Read the user instructions carefully to make
sure you understand all the controls and what
they do.

Keep others, including children, pets and
bystanders outside the 10 metre hazard
zone. Stop the trimmer immediately if you
are approached.

The use of eye protection is recommended to
protect against objects thrown by the cutting
line.

To avoid the possibility of electric shock, do
not use in damp or wet conditions.

Switch off! Remove plug from mains before
adjusting, cleaning or if cable is entangled or
damaged.

Warning

: The cutting line continues to rotate after the

machine has been switched off.

3

6

0

º

10m

Please note:  This manual covers various products.  Please read the user instructions carefully to fully iden-
tify, assemble and use the features that apply to your trimmer.

Upper Shaft

Switch Lever

Electric Cable with
moulded on plug

Guard

Instruction
Manual

Lower
Shaft

Mini Trim ST
Mini Trim Auto ST

Upper Shaft

Switch Lever

Electric Cable with
moulded on plug

Guard

Instruction
Manual

Lower
Shaft

Plant & Tree Guard 

Safety Lock-off Lever

Safety Lock-off Lever

Содержание Minitrim Auto ST










Отзывы: