6
Fault Finding Hints
Fails to Operate
1 Is the Power Turned On?
2 Check the fuse in the plug, if blown replace.
3 Fuse continues to blow?
Immediately disconnect from the mains electric-
ity supply and consult your local approved
Service Centre.
Poor Flotation
1. Disconnect from the mains electricity supply.
2. Clean the underside of the hood and the fan blades.
3. Raise to a higher height of cut. See Adjusting the
Cutting Height.
4. If poor flotation persists?
Disconnect from the mains electricity supply
and consult your local approved Service Centre.
Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Replace broken or missing plastic cutters.
3. Check plastic cutters and cutting head are fitted cor-
rectly and securely located.
4. If vibration persists?
Immediately disconnect from the mains electric-
ity supply and consult your local approved
Service Centre.
1.
We strongly recommend that your product is
serviced at least every twelve months, more
often in a professional application.
2. Always use genuine Flymo Spare Parts.
3. Prepacked spares are available from most
Electrolux Outdoor Products stockists.
4. Your product is uniquely identified by a silver and
black product rating label.
5. If you have a problem with your machine contact
your local Approved Service Centre ensuring you
have full details of your product as described on the
product rating label.
6.
Should it be necessary for work to be carried
out by your Service Centre, it is important to
take your complete machine including cable and
any extension cables used.
A network of specialist dealers can be found in your local
Yellow Pages. To obtain service on your Flymo product
simply telephone or visit your local Service Centre. Should
you require service under the terms of our guarantee the
Service Centre will require proof of purchase.
All of the centres listed stock genuine Flymo Spare
Parts. NOTE: Our Service Repairers act on their
own behalf and are not empowered to commit or
legally bind Electrolux Outdoor Products in any
manner whatsoever.
Service Recommendations
Caring for your Lawnmower
At the End of the Mowing Season
1. Replace plastic cutters, bolts, nuts or screws, if
necessary.
2. Clean your lawnmower thoroughly.
3. Ask your local Service Centre to clean the air filter
thoroughly and carry out any service or repairs
required.
4. Make sure that the electric cable is coiled properly.
Carrying your Lawnmower
Hold as illustrated in
Figure M
. Ensure the cutters
are facing away from you.
Storing your Lawnmower
Store in a dry place where your lawnmower is pro-
tected from damage.
Your product can be stored in a hanging position.
• The back of the handle has a hanging slot for
storing the product on the wall.
1. Hang the product from a hook or suitable screw as
illustrated in
Figure N
.
M
Environmental Information
Electrolux Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using,
where practical, components manufactured in the most environmentally responsible manner, according to compa-
ny procedures, and with the potential for recycling at the end of the products’ life.
•
Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.
•
Awareness of the environment must be considered when disposing of ‘end-of-life’ product.
•
If necessary, contact your local authority for disposal information.
N
