4
Starting and Stopping
• THERE ARE 2 CUTTING HEIGHTS (E & F)
• Height of cut is adjusted by turning
over the cutting head.
•
Disconnect from the mains electricity sup-
ply and wait until the cutting head has
stopped rotating. Turn your lawnmower
upside down.
•
To Remove the Cutting Head and Fan (G)
Hold the fan firmly and twist the cutting
head anti-clockwise as illustrated. Hold
the cutting head in the centre and remove
as illustrated Hold fan in the centre and
remove as illustrated
•
Inspect for damage and clean as neces-
sary before replacing the fan and the cut-
ting head
•
To Refit the Fan and the Cutting Head (H)
Replace the fan as illustrated. Replace
the cutting head, adjusting the height of
cut as required. Hold the fan firmly and
twist the cutting head clockwise, as illus-
trated.
•
IMPORTANT
ENSURE FAN AND CUTTING HEAD
ARE CORRECTLY LOCATED
D
Starting
1.
Hold as illustrated in
Fig D
.
2.
To start, press the lock-off button down, whilst
pressing the lock-off button, squeeze the
switch lever.
Stopping
1.
To stop your lawnmower, release the switch
lever.
G
H
1
2
3
3
2
1
Adjusting the Cutting Height
HIGHEST
This symbol visible
LOWEST
This symbol visible
Lock-off button
Switch lever
E
F
