background image

Maintenance

After you have finished using your trimmer follow
the procedure below:
1. Disconnect from the mains electricity supply.
2. Never clean your trimmer with water, cleaning

fluids, or solvents, just remove debris with a
suitable tool, a soft brush or dry cloth.

3. Using a soft brush, clean around the inside of

the safety guard, the cutting head and the
motor housing air vents.  (Fig L, M).

4. Inspect the trimmer carefully, especially the

parts of the cutting head.

5. If your trimmer is damaged in any way contact

your local approved service centre.  

Never use a damaged trimmer.

6. Wind cable carefully to avoid kinking.
7. Store in a cool, dry place and out of reach of

children.

Fault Finding Chart

WARNING  Disconnect from the mains electricity supply before attempting any 

maintenance or adjustment.

FAULT

CHECK

ACTION

Is the line fed out and visible?

Remove cap and spool, free
line and re-fit spool and cap.

The line may be jammed on the
spool.  Rewind line to remove
crossed loops.  Check that line
is in correct section of spool.

Is the manual line feed working?

Has too much line been fed
out?

Rewind line

.

Contact your local approved Serv-
ice Centre or Husqvarna UK Ltd.
Customer Service.

Is the line cutter missing from
the safety guard?

Contact Husqvarna UK Ltd. Customer Service 

Telephone : 0844 844 4558

No

No

Yes

Yes

LINE TOO SHORT

OR

TRIMMER VIBRATES

CONTINUOUS

CLATTERING NOISE

LINE SNAPS CONTINU-

OUSLY

IF NONE OF THE ABOVE 

OR IF FAULT PERSISTS

Has the motor reached full
speed before use?

No

Allow the motor to reach full
speed before use

Are you using the trimmer
correctly

?

?

Only use tip of nylon line to
trim.

Is the line jamming on the
spool?

Yes

Rewind the line on the spool, if
symptoms still persist, change
spool and line.

L

M

Environmental Information

Awareness of the environment must be
considered when disposing of ‘end-of-life’
product.

If necessary, contact your local authority for
disposal information.

The symbol          on the product or on its
packaging indicates that this product may not be
treated as household waste.  Instead it shall be
handed over to the applicable collection point for

the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
For more detailed information about recycling of
this product, please contact your local council
office, your household waste disposal service or
the shop where you purchased the product.

Содержание Mini Trim ET21









Отзывы: