Flymo Glide Master 340 Скачать руководство пользователя страница 7

Cleaning 
4. Using a soft brush, remove grass clippings from:

•  grassbox (S5)
•  inside of grassbox lid (S6 & S7)

5. Wipe over the surface of your lawnmower with a dry

cloth.(S8)

IMPORTANT
Never use water for cleaning your lawnmower. Do not
clean with chemicals,  including petrol, or solvents -
some can destroy critical plastic parts.

Cleaning the Easi-Reel cable winder
1. At the back of the cable winder, squeeze together the

two catches (T1) and remove the cable spool.

2. Clean the cable spool and the area it was located with

a soft brush (T2 & T3)

3. Replace the cable spool, ensuring it clicks into place.
Transporting the lawnmower.

The lawnmower may be transported on its roller (V).

At the End of the Mowing Season
1. Replace blade, bolts, nuts or screws, if necessary. 
2. Clean your lawnmower thoroughly.
3. Ask your local Service Centre to clean the air filter thoroughly

and carry out any service or repairs required.

4. Make sure that the electric cable is coiled properly.
Storing the lawnmower 
The handles can be folded to take up the minimum of
space 
1. Hold onto the lower handle with your left hand as

illustrated in fig. W.

2. Hold the upper handle with your right hand and push in

the direction of the arrow.

3. Move the handle slowly forward to rest it on the

lawnmower (X).  Do not drop the handle.

Ensure the switchbox cable is not trapped. 

Do not hang the product on the wall as this will
damage the switchbox.

Store in a dry place where your lawnmower is
protected from damage.

S8

V

S5

S6

X

T1

T3

T2

S7

W

Caring for your Lawnmower cont’

Fails to Operate
1. Is the correct Starting procedure being followed?  See

‘To Start your Lawnmower’

2. Is the Power Turned On?
3. Check the fuse in the plug, if blown replace.
4. Fuse continues to blow?

Immediately disconnect from the mains electricity
supply and consult your local approved Service
Centre.

Poor Flotation
1. Disconnect from the mains electricity supply.
2. Clean the underside of the hood and the fan blades.
3. Raise to a higher height of cut.  See ‘Adjusting the

Cutting Height’.

4. If poor flotation persists?

Disconnect from the mains electricity supply and
consult your local approved Service Centre.

Poor Collection
1. Is the grassbox lid firmly closed?
2. Is the grassbox fitted correctly?
3. Are you mowing correctly?
4. Check all air vents and openings are not obstructed.
5. Raise to a higher height of cut.  See ‘Adjusting the

Cutting Height’.

6. If poor collection persists.

Disconnect from the mains electricity supply and
consult your local approved Service Centre.

Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Check that the blade is fitted correctly?
3. If the blade is damaged or worn, replace it with a new one.
4. If vibration persists?

Disconnect from the mains electricity supply and
consult your local approved Service Centre.

Fault Finding Hints

Содержание Glide Master 340










Отзывы: