GUARANTEE AND GUARANTEE POLIC
y
If any part is found to be defective due to faulty
manufacture the guarantee period, Husqvarna UK Ltd.,
through its Authorised Service Repairers will effect the
repair or replacement to the customer free of charge
providing:
(a)The fault is reported directly to the Authorised
Repairer.
(b)Proof of purchase is provided.
(c)The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d)The failure has not occurred through fair wear and
tear.
(e)The machine has not been serviced or repaired, taken
apart or tampered with by any person not authorised
by Husqvarna UK Ltd.
(f) The machine has not been used for hire.
(g)The machine is owned by the original purchaser.
(h)The machine has not been used commercially.
*
This guarantee is additional to, and in no way
diminishes the customers statutory rights.
Failures due to the following are not covered, therefore it
is important that you read the instructions contained in
this Operator's Manual and understand how to operate
and maintain your machine:
Failures not covered by guarantee
*
Failures as a result of not reporting an initial fault.
*
Failures as a result of sudden impact.
*
Failures as a result of not using the product in
accordance with the instructions and recommendations
contained in this Operator's Manual.
*
Machines used for hire are not covered by this
guarantee.
*
The following items listed are considered as wearing
parts and their life is dependent on regular
maintenance and are, therefore not normally subject to
a valid warranty claim: Blades.
*
Caution!
Husqvarna UK Ltd. does not accept liability
under the warranty for defects caused in whole or part,
directly or indirectly by the fitting of replacement parts
or additional parts that are not either manufactured or
approved by Husqvarna UK Ltd., or by the machine
having been modified in any way
ENGLISH - 3
Environmental Information
• Awareness of the environment must be considered
when disposing of ‘end-of-life’ product.
• If necessary, contact your local authority for disposal
information.
BATTER
y
DISPOSAL
• This product contains a NiMH battery and should not
be discarded with normal household waste at the end
of its life.
• The battery must be removed from the product before
disposal.
• The battery should be disposed of safely.
• Do NOT dispose of used battery with household
waste.
• Do NOT dispose of battery to water.
• NiMH batteries can be harmful and should be
disposed of through the recognised recycling facility in
accordance with European Regulations.
• Do NOT incinerate.
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product,
please contact your local council office, your household
waste disposal service or the shop where you purchased
the product.
Service Recomendations
•
y
our product is uniquely identified by a silver and black product rating label.
•
We strongly recommend that your product is serviced at least every twelve months, more often in a professional
application.
Charging the Battery
Initial Charging Procedure
1. Use the charger indoors only.
2. Ensure the charger is not exposed to moisture. Keep
the charger and the Battery Pack dry at all times.
Keep the charger well ventilated during charging.
3. Attach the charger connector
(C1)
to the Battery Pack.
4. Plug the charger
(C2)
into a suitable household
electrical wall socket and switch on.
5. The red indicator lamp
(C3)
glows continuously during
charging.
6. Full charge will be achieved in 5-6 hours. During
charging the charger becomes warm. This is normal
and means the charger is operating correctly.
Re-Charging the Battery Pack
1. Re-charge the Battery Pack as soon as the cutting
power of your Hedgetrimmer begins to die and slow
down.
2. Avoid running the Battery Pack into "deep" discharge,
i.e. avoid flattening the Battery Pack completely.
3. Follow the procedure outlined in the
Initial Charging
Procedure.
4. Charging the Battery Pack according to these
instructions should ensure maximum battery life.
Battery Pack Assembly (D)
1. Attach the Battery Pack as illustrated in
Figure D
,
ensuring that it clicks into position and is located
firmly.
2. To remove, press the two buttons
(D1)
on either side
of the Battery Pack and slide off.
Содержание EASICUT 420
Страница 5: ...A B C 1 D E F G H J 2 3 1 ...