background image

13. Do not incinerate or mutilate the battery. Batteries 

contain hazardous chemicals.  Dispose of properly.

Preparation

1.

While using your product always wear substantial
footwear and long trousers.

2.

Before using the machine and after any impact, check for
signs of wear or damage and repair as necessary.

3.

Inspect the area to be cut before each use. Remove
all objects such as stones, broken glass, nails, wire,
string etc, which can be thrown or become entan-
gled in the trimmer head.

4.

Before use, inspect the area for wildlife, especially
hedgehogs.

5.

Check that the cutting head, spool and cap are fitted
correctly.

Use

1.

Use the trimmer only in daylight or good artificial light.

2.

Avoid operating your trimmer in wet grass, where feasible.

3.

Take care in wet grass, you may lose your footing.

4.

On slopes, be extra careful of your footing and wear
non-slip footwear.

5.

Do not walk backwards when trimming, you could
trip.  Walk, never run.

6.

Never operate the trimmer with damaged guards or
without guards in place.

7.

Never fit metal cutting elements.

8.

Keep hands and feet away from the cutting means at all
times and especially when switching on the motor.

9.

Keep cutting head below waist level.

10. Do not lean over the trimmer guard whilst trimming or

edging - objects may be thrown by the cutting line.

11. Beware of cut-off pieces of nylon line ejected during use.
12. If you hit an object, do not use your trimmer until you

are sure that the entire trimmer is in a safe operating
condition.

13. If the trimmer starts to vibrate abnormally, check 

immediately.  Excessive vibration can cause injury.

Maintenance and storage

1.

Keep all nuts, bolts and screws tight to be sure the
trimmer is in safe working condition.

2.

Replace worn or damaged parts for safety.

3.

Only use the replacement cutting line specified for
this product.

4.

Only use replacement parts and accessories 
recommended by Husqvarna UK Ltd..

5.

To avoid the risk of injury keep fingers and hands clear of
the line cutter on the leading edge of the guard.

6.

Clean unit with a dry cloth. Never use metal objects
to clean the unit.

7.

Inspect and maintain the trimmer regularly.  Any repairs
must be carried out by an authorised repairer.

8.

Store the product in a cool, dry place and out of reach of
children.  Do not store the product outdoors.  

Battery Care

1. If over a period of time the battery quickly runs

down after a full 24 hour charging period, a 
replacement battery is needed.

2. There will be some charge present in the battery

but to ensure maximum running time, recharge
your trimmer for 24 hours before use.

3. Permanent connection to the charger in a well 

ventilated area will automatically keep your battery
fully charged ready for use.

4. To prevent permanent battery damage, never store

in a discharged condition.

5. Contact your local approved service

centre/dealer/distributor for a replacement battery
and for safe disposal of your old battery.

6.

Battery

12 Volt 7 Amp/Hour     "High Power"

Sealed for Life

No maintenance required

• IMPORTANT

DISPOSE OF YOUR OLD BATTERIES SAFELY

DO NOT CUT OPEN, BURN OR INCINERATE. 

Battery Replacement

Should your battery need to be replaced contact your local
approved service centre or dealer who will remove your old
battery and fit a genuine Flymo replacement battery.

To remove the Battery

1. Remove the bolt and nut (as shown in Pic) and remove the

battery cover.

2. Detach the leads from the old battery.

3. Attach the replacement battery

IMPORTANT

The red lead should always be

connected to the red terminal (+)

on the battery.  The other lead

should always be connected to

the black terminal (-) on the 

battery.

4. Refit the battery cover and secure

with the bolt and nut.

Bench Top Re-charging

The wall bracket can also be used as a "bench top"

stand for re-charging your cordless trimmer.

Winter Storage

1. Fully charge for 24 hours before winter storage.
2. If you are unable to leave your cordless trimmer on

permanent charge,  re-charge the battery every 3 to 4
months for a full 24 hour charging period to top up the
battery charge during winter storage.

3. Avoid extended storage without re-charge.
4. Store in a cool dry place.

For further information on Battery replacement 

contact Husqvarna UK Ltd. Customer Service direct:-

Telephone:  01325 300303   Fax:  01325 302530

Battery

Содержание CONTOUR POWERPLUS CORDLESS CCT250











Отзывы: