flyingwings Hornet Mini FPV Racer, Руководство пользователя

Страница: 4 / 10

Installation of servo adaptors:
Open up the top hole on each ply horn so that the threaded part of
the metal servo adaptors are snug but can turn in the horn. Put the
washer and nut on (not easy when you have fingers like sausages
!). Tighten the nut so the adaptor is firm but can still turn. A blob of
CA glue on the end of the nut will stop it from coming loose.
blob of CA
Glue
washer
nut
STEP
4
Hinging elevon,
Method , UHU Por hinge. Run a small bead of glue along the rear top edge of
thetrailing edge of the wing and the same on the leading edge (LE) of the elevon.
Allow glue to set for 5 minutes. On a flat surface bring the two edges together, the
glue fuses together giving a strong flexible hinge, magic.
STEP
3a