Flyingvoice FIP12WP Скачать руководство пользователя страница 4

Страница: 4 / 51

Flyingvoice Network Technology Co., Ltd. IV/V

Manufacturer: Flyingvoice Network Technology Co., Ltd.

Address: Room 207~209, 2/F, Bldg B52#, Zhongchuang Industrial park, Liuxian Avenue,
Taoyuan Street, Nanshan District, Shenzhen

Hereby, Flyingvoice Network Technology Co., Ltd. declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive 2014/53/EU

A copy of the declaration of conformity can be obtained with this user manual; this product
is not restricted in the EU.

The wireless operation frequency.

WIFI: 2412MHz-2472MHz, Max EIRP Power 19.36dBm

Safety Warning and Attentions

If use adapter, adapter must be comply 2014/30/EU Directive.

Adapter Caution: Adapter shall be installed near the equipment and shall be easily accessible.

Do not store or use your product in temperatures higher than 50ºC.

RF Exposure Statement

The distance between user and products should be no less than 20cm.

Содержание FIP12WP




















































Результаты поиска

Содержание FIP12WP

Отзывы:

Бренды по названию

Популярные бренды

Flyingvoice FIP12WP, Руководство пользователя

Результаты поиска

Содержание FIP12WP

Отзывы:

Бренды по названию

Популярные бренды