Flying Lemon cytrynka PDB, Руководство пользователя

Страница: 13 / 20

minimOSD connector
With our PDB is possible to install minimOSD directly on board. For this purpose
under the FC are pads to solder pins.
MinimOSD can be directly programed with UART2/1 (depending on selected serial
port) connectors on PDB using FTDI programmer. OSD DTR is connected to RESET line
on minim.
If is used other OSD like minim (or with not compatible pinout) short selected pins on
PDB.
For UART2 solder like this: For UART1 solder like this:
13
WARNING: Before soldering minim on PDB select desired serial port
number through solder jumpers. We recommending use UART2. See
below.
Solder jumpers for serial
ports selecting for minim.