SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://w ww.carymart.com E-Mail: [email protected]
1) Connect setting terminals
until LED flashes slow ly; disconnect setting terminals, the receiver enters into status of LEARNING.
2) Press and hold button 1 on remote control, LED flash once, release button 1; then press and hold button 2 on remote control, LED flash once
again; finally, press any one button on remote control. If LED off, it means learning is successful.
3) The receiver can learn 12 buttons w ith different codes.
DC6V ~36V
Application Circui t
DC Lamp
OUT- OUT+
LED
Antenna
Setting
Terminals
Work mode terminals
1
2
Input
+
_
Power supply
4
3
VCC GND
