flying eagle Fys-13, Руководство пользователя

Страница: 5 / 20

5
and nut. Then screw the nut tight in 6 place.
4. Attaching the chipper tube to the basic machine.
Note: The short chipping chute refers to Fys-13 and the long chipping chute refers
to Fys-13L.
figure 4
4.1. Put the chipper tube 2 in place on the side of the basic machine. Align the three
mounting holes in the flange with three holes around place 1.
4.2. Secure the flange with gaskets and nuts M8. Make sure the chipper tube has no
deflection before tighten the nuts.
5. Mounting the discharge grid.
5.1. Remove the thumbscrews on both sides of the movable door and lift the door
on the highest position. Hook the grid on the axis of the door and clamp the grid
with the spring to prevent the grid falling off.