4
–
ELIOS 2 GOV Controller
ELIOS 2 GOV USER MANUAL
Page 7 of 13
Connections
USB-C PORT
Use this connector to connect the RC to the tablet
ANTENNA
Connect the antennas here, we recommend attaching the antennas before powering on the unit.
Operating the system without the antennas attached will significantly reduce range and might
damage the controller.
ETHERNET
Can be used to connect to the tablet via a USB dongle, has the same function as the USB-C
connector.
CHARGE PORT
Connect to the controller charger to charge the internal battery of the controller.
USB MINI-B
This USB connection can be used to connect the controller to a PC for potential firmware updates.
RIGHT STATUS LED
-
Solid Green: system operating normally
-
Blinks White: Not linked to drone
-
Blinks Green: Internal connection error
-
Solid Purple: Firmware error
-
Solid Red: HDMI camera input not detected
-
Blinking Red: Analog camera input not detected
LEFT STATUS LED
-
Solid Green: System operating normally
-
Solid Red: No radio connection between the Ground station and drone
-
Blinking Green: Binding mode
-
Solid Purple: Firmware error
-
Blinking Purple: Overheating error