“FLASH 100” OWNER’S MANUAL REL . 2.0
___________________________________________________________________________
©
Copyright by
FLY
Products
s.r.l.
Page
6
2.0
UNPACKING AND ASSEMBLING
“FLASH 100”
2.1
Frame Assembly
Step 1 : Assembling outer frames
Fig. 3 supports
Fig.4– starter pulley section
Fig. 5 – Tube supports mounting
Tube supports (fig.3) are in pairs in two different lengths.
Prepare the “
A
” tube supports into the start pulley support before connect them into their seats.
Mount the external cage supports as shown in fig.5.
NOTE
:
You might want to add that assembling the cage in this order is the easiest way.
Step 2 : Assembling upper frames
Insert the two upper supports “A” into their seating as in fig. 6.
Fig. 6 – Mount the cage into the upper supports
Fig. 7 – upper side connection
