4. Operating Fluxient 3XU2 light
•
The switch is illuminated while plugged in which makes it easy to locate in the dark.
•
The light starts in the OFF mode.
•
Quick Push the switch button for High, Medium, Low and Strobe
•
Push and hold the switch button for two seconds (from any setting) to turn the light OFF.
5. Battery Level Indicator
As the battery depletes, the backlit switch button will change color from Blue to Red.
Blue 100%-20% Red 20% - 0%
6. Battery Storage
Disconnect the battery pack from the light head when not using. Store the battery pack fully
charged and re-charge it before using the lighting system again. If not used for an extended
period of time, please store the battery pack in a cool dry place to avoid excessive discharge.
7. Troubleshooting
Failure
Caused
Solution
No light
Battery is over discharged
Charge the battery
Battery is not plugged in
correctly
Make sure all parts are firmly
connected
Running time too short
Battery is not fully charged
Charge the battery
New battery
Charge the battery
Very old battery
Replace the battery
Cold temperature
Keep the battery warm
Defective charger
Replace the charger
Flicker
Cables not secured
Make sure all parts are firmly
connected
8. Technical Data
LED: 3 Cree XML U2 LED’s
LED lifespan: 50,000 hours +
Brightness: 3000 lumens
Range: 500m
Lens: High transparent Hardened Glass
Modes: 3-level adjustable brightness &flashing.
Over-heat protection function: If the unit
overheats the light will auto power down to 30%
until the temp cools then it will auto power back
up to 100% (This is to save the LED’s and
Battery.)
