Fluxamp FLX13000, Руководство пользователя

Страница: 4 / 11

Start your vehicle (figure 4).
a. If after 3 seconds engine does
not start, turn key to OFF posi-
tion.
b. Detach the FLX13000 from
the clamps. Wait 60 seconds
and then follow steps 11-16. If
problems still persist, please see
the Troubleshooting section in
your FLX13000 Owner's Manual
for other possible causes (figure
5).
4
Start
Vehicle
6
You are now able to drive your vehicle. You should be sure to run your vehicle
for at least 15 minutes before shutting it off again. If you have engaged the
emergency brake, disengage before driving your vehicle.
Operation Guide:
Press the on/off switch to activate the lights. The display as below shows the
level of power in relation to the number of lights illuminated.
The indicator lights will flash one by one when the unit is charging. A solid light
indicates a complete level of charge. For example, when 2 lights are illuminated
and a
third is blinking, that means the unit is between 40 -60% charged. Once the
third light stops blinking the unit is 60% charged.
•
•
•
13.
14.
15.
16.
Indicator Lights
The FLX13000 Jump Starter has 5 indicator lights to determine the amount of power in the unit.
1. With the wall plug 2. With the car adaptor in your vehicle
Charging the FLX13000 Jump Starter
Your FLX13000 Jump Starter has two options for charging the unit:
Charging
100% 80% 60% 40% 20%
When all five light are lit, the unit is fully charged!