Technical Data
4xT1/E1 i nline probe ASE
W i t h L i n k S a f e c a p a b i l i t i e s
Key features
Four management ports
MLPPP support on IP Transport software
Inband management capability
LinkSafe technology
Power loss detection
Service Level Agreement (SLA) metrics
Application analysis capability
LMI spoofi ng
LAN management port
Realtime events
•
•
•
•
•
•
•
•
•
•
The Visual UpTime® Select™ 4xT1/E1 inline probe
ASE enhances the data analysis functionality of the
Visual UpTime Select system for enterprises with
two-to-four T1 or E1 circuits terminating at a single
location. The ASE provides up to 6.176 Mbps
(T-standard) or 8.192 Mbps (E-standard) of detailed
network traffi c analysis and management, while
maintaining full wire speed pass-through of all
traffi c. In its initial release, the ASE supports IP
Transport software over MultiLink Point-to-Point
Protocol (MLPPP) T1 links.
The 4xT1/E1 ASE includes LinkSafe™ technology
to protect circuit integrity in case of a power outage
and it also delivers a notifi cation alarm if there is a
power failure.
Designed for locations with multiple circuits
terminating at a single device, the 4xT1/E1 is typi-
cally deployed as an inline probe between the service
provider’s edge device and the customer’s termination
equipment. The fi gure below highlights the multilink
deployment for the 4xT1/E1 ASE.
4xT1/E1 inline probe model model 807-0115 rear
4xT1/E1 inline probe model 807-0115 front
4xT1/E1 inline probe model 807-0115 position on network
Visual UpTime
Select
ASE model 807-0115
Bundled
T1 Line
LAN
4xT1/E1 inline ASE
Optional LAN Connection
CPE Router
WAN
