N E T W O R K
S U P E R
V I S I O N
Fluke Networks
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks
operates in more than 50 countries
worldwide. To fi nd your local offi ce contact details, go to
www.fl ukenetworks.com/contact
.
©
2006 Fluke Corporation. All rights reserved.
Printed in U.S.A. 2/2006 264xxxx D-ENG-N Rev A
What are ASEs?
ASEs (Analysis Service Elements) are data
collection and network performance monitor-
ing hardware devices placed on a wide area
network (WAN) or Local Area Network (LAN)
as part of the Visual UpTime Select system,
which offers in-depth, real-time, and historical
visibility into the performance of your
applications infrastructure. In the system,
data gathered by ASEs is stored in the Visual
UpTime Select server and displayed and ana-
lyzed from the Visual UpTime Select Web client.
As a service level management tool, ASEs
indicate when services are being met, provide
warnings when services start to degrade, and
send alerts when services are not met.
Hardware Warranties
Enhanced Gold, Bronze, and International
Gold ASE hardware warranty service programs
are available to help you maximize your
investment in Visual UpTime Select. For more
detailed warranty information, visit:
www.fl ukenetworks.com/visualcustomercare
Ordering Information
For more details, please contact your Visual
UpTime Select authorized reseller or
Fluke Networks Sales at (800) 240-4010
or (301) 296-2300.
T1 CSU/DSU ASE specifcations
General
Dimensions
8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm)
Plastic case with internal power supply.
Weight
2.10 lbs.
Data Rate
1.544 Mbps synchronous
Timing Mode
Derived externally from the T1 network or DSX-1
interface, or internally from the ASE.
Environment
Operating Temperature
0
o
to +40
o
C (+32
o
to +104
o
F)
Storage Temperature
-20
o
to +55
o
C (-4
o
to +131
o
×F)
Clearance Requirement
Minimum of 3” (7.62 cm) space on sides.
Operating and Storage
Humidity
10% to 90%, noncondensing
Power Requirements
Input
100 to 240 VAC
Frequency 50/60
Hz
Input Current Rating
0.5 amps
T1 Network Interface
Line Rate
1.544 Mbps ±50 bps synchronous
Line Format
AMI or B9ZS line coding
Framing
ESF or D4 framing formats
ESF FDL
ANSI T1.403, AT&T TR54016, Both, or None
Input Signal
0dB to -36dB
Output Signal
0, -7.5dB, -15dB, -22.5dB LBO
Pulse Density
AT&T 62411
Connector
8-pin modular jack—USOC: RJ48C
Timing
Loop, DSX-1, or Internal
Channel Selection
1 to 24 channels in any combination
Network DTE Interface
(Data Port)
Confi guration
DCE for interfacing with DTE
Data and Clock Leads
ITU-T V.35
Signaling Leads
EIA RS-232 (ITU-T V.28)
Data Rates
56 kbps x N or 64 kbps x N (N = 1 through 24)
HDLC Inversion
Selectable V.35 data inversion
Transmit Timing Basis
Network selected-source timing
Receive Timing Basis
SCT, inverted SCT, SCTE
Receive Line Data Not Valid
RLSD, CTS
Connector
Female 34-pin V.35 connector
DSX-1 Interface
Line Rate
1.544 Mbps ±50 bps
Line Format
AMI or B8ZS
Framing
ESF or D4 (SF)
Input Signal
-1dB to -11dB
Line Equalization
0 ft, 133 ft, 266 ft, 399 ft, 533 ft, 655 ft
Connector
RJ-45
Channel Selection
1 to 24 channels in any combination
Serial Port Interface
Specifi cations
19200 or 9600 bps baud rate, 8 data bits no parity,
1 stop bit, EIA RS-232 DTE electrical format, RJ-45
connector
Ethernet 10/100BaseT
Interface
Bite Rate
10 or 100 Mbps
Connector
8-pin modular jack: RJ-48
