Set the type to “None” for the
Test transmission
.
Attachment file
: Enter the file that is to be sent as an attachment here.
l
To conclude, click on <Save Settings> and confirm the following message with <OK>.
The "Email configuration" section now contains another field for entering the recipient data " Recipient Name".
l
Click on <Add New> under "Email configuration" / "Recipient Name” to enter the recipient data. The input
mask for the recipient data appears:
Configuring the Email recipient
Recipient name
: The recipient name corresponds to the addressee of the email. If this information is not
known, any meaningful identifier can be entered.
Email Address
: Email address of the recipient.
l
To conclude, click on <Save Settings> and confirm the following message with <OK>.
Backing up the Email configuration
The data is now in the temporary memory and only needs to be backed up in the “email.xml” configuration file.
l
Click on <Save > and confirm the following message with <OK>.
Now that you have entered and saved all the requisite information and parameters, carry out a transmission test to
determine whether emails arrive at the recipient as intended.
25
Edition: 10.2018
Commissioning