10 Configuring Email transmission
Prior to testing email transmission, ensure that the active (HTTP) connection to the CMS does not affect com-
munication with the SMTP server (email).
When dialing in via a dial-up unit, the communication path to the SMTP server can be interrupted. For this
reason, the email transmission test is usually carried out using a direct connection to the system (on-site).
Requirements for email transmission:
Network connection to the router or to the Internet
Gateway address is available and correct
Email configuration has been set up properly
CMS is ready for operation
When integrating the system in an existing network, the following requirements are to be discussed with the ope-
rator or administrator of the network:
Network parameters for
Gateway
and
SMTP server
SMTP server is to be enabled for email transmission by the CMS
10.1 Configuration
l
Click on <System> on the homepage. The “System Menu” page appears.
l
Click on <Email Configuration> in the “Configuration” field. The menu with the email parameters appears.
The menu is split into three sections:
Email configuration display
: Configure sender data
Account configuration
: Create an email account
Email configuration
: Configure Email
Set email parameters
Sender
VIBGUARD IIoT
22
Commissioning