Figure 11. TAP-100-2X16 switch removal
Loosen the two rear panel thumbscrews, as shown on the previous page in
Figure 10
, in a counter-
clockwise direction until each springs free from the main chassis section threads. Apply firm but equal
pressure to the thumbscrews to start the forward motion of the TAP-100-2X16 section and remove it
from the rack enclosure as shown above in
Figure 11
.
SWITCH SECTION REPLACEMENT
To reinstall the TAP-100-2X16 section into the rack enclosure, reverse the steps indicated above.
13
Switch Removal and Replacement
